4 - 17 EXPERIMENT DEPLOYMENT/CONDUCT A. Test Objectives S-031 Deploy the Passive Seismic Experiment Package S-078 Deploy the Laser Ranging Retro-Reflector Experiment S-080 Conduct the Solar Wind Composition Experiment B. Test Requirements 1. Emplace, level and orient the Passive Seismic Experiment Package (PSEP). Deploy the solar panels and aim the antenna at the earth. [S-031 ] 2. Photograph the deployed PSEP and deployment area. [S-031] 3. Remove the Laser Ranging Retro-Reflector (LRRR) from the descent stage and carry it to the deployment site. [S-078] 4. Emplace, level and orient the LRRR to the alignment marks corresponding to she landing site. [S-078] 5. Remove the Solar Wind Composition Experiment from the LM MESA and deploy it on the lunar surface. [S-080] 6. After one hour operation, disassemble the Solar Wind Composition Experiment, place the reel and foil in a teflon bag and store in a sample return container. [S-080] C. Procedures/Checklist None D. Data Requirements 1. Flight Crew Reports/Logs/Photographs a. Comment on deployment of experiment. [S-031] (M) b. Photograph deployment area. [S-031, S-078, S-080] (HD) c. Comment on location of deployed experiment with respect to the LM, attitude of deployed foil with respect to the sun and total time foil was deployed. [S-080] (M) d. Retrieve reel and foil from the Solar Wind Composition Experiment. [S-080] (M) e. Comments on orientation and elevation setting used for deployment. [S-078] (HD) 2. Ground Support a. Experiment TLM Data [S-031] (M)